PH FAIL ROTRESET MOTOR TEMP 24-240VAC/DC

RM35TM50MW
Be the first one to review this.
login_green To View the best prices please Sign in / Register.
Only 0 left in stock.
plain-icon

Description

Harmony, Modular motor voltage and temperature control relay, 5 A , 2 NO, 24..240 V AC/DC

Product Details

Activity IDSIG
Dielectric Test Voltage 2 kV, 1 min AC 50 Hz
Directives 73/23/EEC - low voltage directive#|#89/336/EEC - electromagnetic compatibility
Immunity to Microbreaks 20 ms at 20.4 V
Maximum Switching Voltage 250 V AC, 250 V DC
Shock Resistance 15 gn for 11 ms conforming to IEC 60255-21-1
Measurement Range 208...480 V voltage AC, 0...20 Ohm short-circuit detection
Mounting Support 35 mm symmetrical DIN rail conforming to EN/IEC 60715
Nominal Output Current 5 A
Mechanical Durability 30000000 cycles
Overvoltage Category III conforming to IEC 60664-1
Pollution Degree 3 conforming to IEC 60664-1
Power Consumption in VA 0-4 VA at 24...240 V AC
Net Weight 0.13 kg
Relative Humidity 95-95 % at 55-55 °C conforming to IEC 60068-2-30
Relay Monitored Parameters phase sequence#|#motor temperature via PTC probe#|#phase failure detection
Relay Name RM35TM
Relay Type motor temperature control relay
Reset Time 10000 ms output
Tightening Torque 0.6-1 N.m conforming to IEC 60947-1
Vibration Resistance 0.35 mm (f= 5-57.6 Hz) conforming to IEC 60068-2-6, 1 gn (f= 57.6-150 Hz) conforming to IEC 60255-21-1
Weight (in Kg) 1kg
Ambient Air Temperature for Storage -40-70 °C
Maximum Switching Current 5 A AC, 5 A DC
Compatibility Code RM3
Connections - Terminals screw connectors
Insulation Resistance > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5, > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1, > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5, > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1, > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5, > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
Local Signalling LED (green) for power ON, LED (yellow) for phase of relay (R2), LED (yellow) for temperature of relay (R1)
[in] Rated Current 5 A
[uc] Control Circuit Voltage <= 3.6 V of temperature control circuit (T1-T2 terminals open)
Housing Material self-extinguishing plastic
Minimum Switching Current 10 mA at 5 V DC
Ambient Air Temperature for Operation -20-50 °C
Range of Product Harmony Control Relays
Product or Component Type 3-phase control relay
Width 35 mm

Seller Information

Documents

Extended Warranty

Reviews

Write Your Own Review
You're reviewing: PH FAIL ROTRESET MOTOR TEMP 24-240VAC/DC
* Required Field
loader
Loading...

check-circle You submitted your review for moderation.